Our Universal T-track features a unique 'stacked' T-slot that accepts both 5/16' T-bolts and 1/4' T-bolts, as well as 1/4' Hex-bolts. This means you can use all the hardware and T-track accessories from your old jigs in addition to the newer style hardware. The T-tracks are available in 2 ft, 3 ft, or 4 ft lengths. The miter T-bar slides into the miter track or miter slot in your table saw. The T-bar can be used to make sliding jigs and other fixtures throughout the shop. Add a lock down knob by drilling and tapping the T-bar, there is no end to the possibilities. Use #7785 (1-1/4' Straight bit) to make the groove for the Miter T-Track.
The Uni-T-Fence is a heavy duty aluminum extrusion up-grade fence for the Delta Uni-fence Table Saw System. The extruded square design allows you to attach or even build many different types of jigs and fixtures. Comes in 36' and 43' lengths, each sold separately. Delta Uni Fence is not included.
Uni-T-Fence Anatomy
Width= 2'
(Doesn't require fence scale adjustment and fence can be swapped in and out with original)
UHMW Fence Face Opening is exactly 1/2' deep which allows the use of any 1/2' stock (UHMW, plywood or hardwood) to be used as a temporary fence face (burying dado blade in the fence)
'A' T-Slots
The A t-slots are for mounting fence accessories like board buddies, fence featerboards and shop made jigs. The A t-slots take a standard 1/4' hex head bolt or 1/4' t-bolt.
'B' T-Slots
The 'B' t-slot on the fence side is deeper than standard to take 1/4' hex nuts. This makes for easy mounting for the UHMW fence face.
'C' T-Slot
The 'C' t-slot is used to mount the Uni-T-Fence to the standard Delta® Unifence Guide. The slot is 5/16' wide x 1-1/2' high
T Slot Framing Rails
D' UHMW Fence Face
The UHMW fence face is pre-drilled and mounted to the fence. We us UHMW for the following characteristics:
Homemade T Track
- The highest abrasion resistance
- Outstanding impact strength even at low temperatures
- Excellent sliding material due to low coefficient of friction
- Self-lubricating
- Easily machined with common woodworking tools
'E' T- Slot
The 'E' t-slot is used to mount the Uni-T-Fence to to other table saw or machine fences. The center line of the 'E' slot is 1-1/64' from the bottom of the Uni-T- Fence and takes a 1/4' hex head nut or bolt head.
T Slot Rails For Jigsaw
Note: All dimensions are approximate